How To Remove Rust From Your Truck

Do you want to remove rust from your truck? As your truck is aging, it is likely to start rusting. Rust is a chemical process that is not only brought as a result of aging, the exposure to salt and water increases the rate at which rusting happens. If you keep your truck outside, the wet night temperatures will likely facilitate the rusting process. If you live in areas that experience winter seasons, driving your truck on wet roads where salt has been used to melt down snow and ice exposes your truck to rust. 

Rust can be a nightmare, especially when it appears on your loved truck. But it should not worry you since rusting is inevitable in anything made of metal. Here you will learn how to do away with rust from your truck. 

Remove Rust From Your Truck

When working on any part of the car, safety is a number one priority worth considering. Ensure your truck is parked on a flat surface with the parking brakes engaged. Put on glasses to protect your eyes. Ensure you are performing the procedure in a properly ventilated area. Here is how to remove serious rust from your truck.

Tape Off the Area

First, you need to isolate the area you are working. Doing this will protect the non-rusted areas from damage. When performing this procedure, a lot of rust and paint particles will be suspended in the air, which is unhealthy. Consider using real masking paper instead of a newspaper.

Remove the Paint and Primer

When doing this, start low as you work your way up. Use a dual action sander and a held-held grinder with a flap disc for the best control are the best for this procedure. Sanding through paint and primer will remove the rust on the metal. This process will remove most of the surface rust, but the rust usually perforates the metal leaving small holes. 

Remove Rust Pits

To do this, you will need a grinder, a drill with a wire wheel, or a chemical component that will remove rust. During this process, put on eye protection and a dust mask. The wire wheel will help you remove rust hiding below the metal surface and the pits. Remember that everything must be clean because primer and paint cannot stick to rust.

Prime the Surface

A proper painting job starts with a well-primed surface and thus uses a primer that is the best for direct metal contact. After this, you can use the best finish panel with surfacing primer or body filler, then a suitable paint. Remember, it is not good to use body filler on a metal surface directly, as the repair will crack with time.


Any form of rust is not good for your truck, and it is essential to protect your truck from rust. Most trucks get into contact with salt during winter, and after winter, the slightly warm temperature facilitates the process of rusting. It is essential to wash your truck thoroughly after winter. Doing this will let you spot areas that have started to develop rust and take the necessary precaution. Shared in this guide are some of the ways to remove rust from your truck and make it last longer.

How Often To Replace Brake Pads Of Your Truck?

In this guide, we will go through a guide on how to replace brake pads of your truck. Brake failure is a major cause of most accidents. In the United States, 300,000 car crashes result from brake failure. It is thus essential to protect yourself and other road users by maintaining your brakes.

The brake pads are one of the basic components of the braking system that are in pairs per wheel. The primary role of the brake pads is to press against the rotor to create friction to stop your truck. They are made of various materials such as metal, ceramic or organic materials. Its surface has a special material that creates friction when you press the brake pedal. 

Signs You Need To Replace Brake Pads Of Your Truck

Brake pads wear out with time, just like other mechanical parts of your truck. When worn out, they become less effective, making it difficult to control your truck. As a truck owner, it is necessary to perform a regular brake pad inspection to be sure they are working perfectly. If broken, you need to replace brake pads of your truck.

Apart from regular maintenance and replacements, avoid sudden and aggressive braking, as such habits reduce the lifespan of your brake pads. Here are the common signs that your brake pads need a replacement.

Grinding Noises

Braking should be as silent as possible, especially when driving at a lower speed. When you hear screeching noises whenever you gently press your brake pedal is an indication that the pads are worn out. The sounds result from the friction between the brake pad and the rotor. Address it as soon as possible. If you ignore it, your brake rotors will be damaged.

Your Truck Takes Time To Respond

Brakes should be very responsive, but when you press the brake pedal, but your truck takes time to stop, it indicates that your pads are worn out, and you should replace them. Such a problem can be dangerous when you need to stop abruptly. Consider checking your brake pads whenever you realize your truck is taking time to stop. 

Vibrating Brake Pedal

If your brake pads are worn out, the pedal will vibrate whenever you press them. The vibration usually results from damaged brake rotors that lead to uneven wear of the brake pads. When you feel such vibrations, you must check your brake pads and replace them when necessary. 

Warning Lights On The Dashboard

Modern trucks have brake pad wear sensors that will turn on the brake warning lights on your dashboard whenever the pads are worn out. The appearance of such light is a reminder that you should replace your brake pads.

When To Replace Brake Pads

After covering 50,000 to 70,000 kilometers, your truck will need new brake pads. But other factors, such as poor driving habits, can fasten the rate at which your pads wear out.


Truck brake pads are the braking system parts that are in friction with the brake rotors. Due to friction, it wears out and needs a replacement. When worn out, you will experience some of these signs. The lifespan of your brake pads solely depends on your driving habits and how often you use your truck. Shared in this guide is how to replace brake pads with ease.

How To Clean a Carburetor Of A Truck

Are you wondering how to clean a carburetor of a truck? A truck’s fuel system has several parts that play the role of storing and supplying the engine with fuel. The fuel mixes with air, and this mixture burns inside the cylinders to generate energy to get your truck moving. Carburetor plays the role of mixing fuel and air in the right ratios for the combustion to occur. Carburetors have been used for several years, even though modern trucks do not use them. Instead, they have an electronically controlled fuel injection system.

When dirty and clogged, the carburetor will not function effectively, which can interfere with your truck’s performance. Upon reading this guide, you will understand the procedure for cleaning your carburetor at your fingertips.

How To Clean A Carburetor of A Truck

To clean a carburetor of your truck, you will need:

Screwdriver set

Wrench set

Circular and flat wire brush.

Catch pan

Shop towels

Chemical dip.

Here is what to do after having all the necessary tools.

Remove the Carburetor from the Manifold

You can clean a carburetor when it is on the manifold, but this will not eliminate all the dirt. You might drop something, and it can be hectic to pick it up. After detaching the carburetor from the manifold, staff a clean rug to prevent debris from getting in.

Drain Fuel

Mixing air and fuel takes place in the carburetor, and it can’t miss some fuel. Before you disassemble it, consider draining all the fuel. To do this, place it upside down to let all the fuel flow out. To speed it up, you can cycle the throttle.

Tear Down the Carb

The process of tearing down the curb varies depending on the carburetor your truck uses. Therefore, there is no exact procedure for performing it. When tearing it down, track the procedure to know where each part comes from. Doing this will facilitate the reassembling process since each part has to go to its exact location.

Start with the Big Bits

Before dipping your carburetor into the chemical bath, remove all the heavy deposits on its surface. To do this, use a brass brush and carb cleaner, you will be saving time and preserving the life of chemical bath. 

Take a Bath

After removing the bulk of dirt, gently lower each part for a bath and soak them for 20-30 minutes. You can work on the parts in batches to speed up the entire process.  

Spry & Scrub

After removing the parts from the solvent, some areas will still have dirt build-up. Use carburetor cleaner and clean brass to scrub these areas. 

Blow Curb Cleaner

Carburetors have various holes and passages that can be filthy. Blow the curb cleaner and watch if it is coming out, if not, use a thin wire to clear the blockage in the holes. When every part is clean, reassemble your carburetor and fix it in the manifold.


A clean a carburetor of a truck, it will increase its lifespan as well as the performance of your truck. A clean carburetor will deliver the necessary air-to-fuel mixture ratio to the engine. The procedure in this guide is all you need to clean your carburetor at home. If you are unsure, consult a professional to do it for you. 

Basics of Changing Windshield Wipers For Trucks

Trucks perform better on both off-road and highways. When driving on a dusty surface or during the rainy season, the windshield traps water droplets and debris that interfere with your vision. The windshield wipers eliminate dust particles, water droplets, and other debris that may hinder the driver’s visibility.

Windshield wipers usually wear out as they perform their functions. When worn out, it will not wipe clearly. Therefore, changing the windshield wipers after 1 year is essential for consistent performance. You will be able to understand some of the basics of changing windshield wipers after reading this guide. 

Truck Windshield Wiper Problems

Windshield wipers perform simple functions with basic components but can give you a headache when faulty. Here are the fundamental windshield wiper problems you should be aware of.

  1. Streaking makes the windshield wiper smear water rather than wiping it.
  2. Noisy results from the rubber blade dragging against the windshield.
  3. The blade might sometimes jump across the chunks on the windshield without wiping them.
  4. A particular part of the blade may be properly functioning. Sometimes the bottom blade may be functional while the top blade does not wipe this is splitting.

What You Need to Change Windshield Wipers

Changing windshield wipers takes roughly 30 minutes, and it does not need any specialized skill. The procedure can sometimes be dangerous and messy. Before starting, wear safety glasses and mechanic gloves. Get a flathead screwdriver and a set of new windshield wipers. 

You will need a spacious and flat workspace like street parking, garage floor, and driveway. When performing this procedure on the street, ensure you are not committing any traffic offense. Your tools should be well organized and easily reachable to save time. 

Changing Windshield Wipers

After having all the necessary tools and the right windshield wiper for your truck, perform the below procedure to change the windshield wipers for your truck.

  1. Locate the center blade of your windshield and let it be perpendicular to the truck in an up position. 
  2. After letting them stand perpendicularly to your truck, you can unclip and unhook them to remove the wiper blades. Follow the manufacturer’s instructions that accompany. 
  3. Check around the new blade. If you spot any protective material, consider removing it.
  4. If necessary, disconnect or attach a different adapter. This varies depending on the blade which you have bought. 
  5. You can now install the new blade. When doing this, stop as soon as you hear a clicking sound or as per the manufacturer’s instruction on the new wiper blades.
  6. Reinstate the wipers onto the windshield and get into your cabin to test if the new wipers are effective by spraying some water on the windshield and letting the new blades wipe it. 


The windshield wiper has simple basic components that do not require any special skills, but when faulty, you will have the worst driving experience in any adverse weather. Before completely wearing out, you will notice some signs. Never ignore them, and consider replacing the windshield wiper blades for your truck as soon as possible. 

Replace Truck Parts – What Is The Best Time To Do It?

What would be the best time to replace truck parts? Even though you love your brand-new truck and take care of it, it is a machine with various parts. The function of these parts is what enables your truck to serve you. As such parts function, they are subject to wear and tear, and replacing them is inevitable. 

When To Replace Truck Parts

Most truck owners are unaware of and wonder when to replace truck parts. Different truck parts wear out at different times. As you read this guide, you get insightful information about when to replace various vital truck parts.


The battery ages after a few years, and if this happens, the performance of your truck reduces. The truck battery keeps charging and discharging and comes a time when it wears out and needs a replacement.

Generally, the best truck battery will give 4-5 years of service, so consider replacing your battery after every five years. It is essential to check your battery after every 12 months.


Tires are the most important part of your truck that are subject to daily wear and tear. The performance and safety of your truck depend on the condition and nature of your tires. It is thus essential to regularly check your tires and make necessary changes as you look to replace truck parts.

Ideally, the best quality tires should serve you for several years, but you should replace them as soon as they show signs of wear and tear. Various factors affect the lifespan of tires, such as driving habits and terrain. Therefore it is difficult to determine the exact time to replace your tires.

Brake Rotors

Brake rotors are a basic and essential part of the braking system that is attached to the wheels. The rotors are exposed to daily wear and tear. But, driving on worn-out brake pads reduces their lifespan very fast. 

You should replace your rotors after every 50,000 -70,000 miles. You can do this earlier if you hear squealing or grinding noises when you press your brake pedal.

Spark Plugs

Petrol engine trucks depend on spark plugs for combustion. They play the role of ignition and generation of necessary power that starts and drives your truck. If your truck does not accelerate properly, or the engine surges, consider checking the condition of your spark plugs. 

Generally, spark plugs will give you 8 years of service, but this depends on the type of truck you have.

Shocks and Struts

Shock absorbers enable the wheels to recover immediately after hitting bumps on the roads. Struts support the weight of your truck and determine how it handles while on the road. These parts offer different life guarantees. Essentially you should replace them after every 50,000 – 100,000 miles. You can also do it as soon as you experience unstable braking, poor steering, and stiff performance.


Other parts will require replacement apart from the parts mentioned above, like the windshield, transmission fluid, oil, brake pads, coolant oil, and air filters. You can check the owner’s manual to know the exact time to replace such parts. The guide will also let you know when to replace truck parts as part of basic service maintenance

Seasonal Maintenance Tips For Truck Owners

Scheduled seasonal maintenance is a practice you should heed if you want your truck to give a longer service. However, various seasons have various adverse effects on your truck. It is thus necessary to maintain and prepare your truck for seasonal changes. Here are seasonal maintenance tips worth knowing.


 It is essential to check your truck at the beginning of spring thoroughly. Here is what to do for a spring seasonal maintenance.

Body Cleaning

The exterior of the truck can be affected by the winter snow, and there are higher chances that you never washed your truck during winter. During spring, wash your truck and focus more on the underbody. The mixture of snow and salt can corrode your truck, the process of corrosion can be slow during winter, but the spring temperatures can accelerate the corrosion. Cleaning your truck will let you see the corrosion and repair them.


 All-season tires can endure the harsh winter. Consider checking their condition during spring. If they are okay, you can rotate them. Remove the snow tires at the onset of spring.


At the beginning of the spring season, consider checking the condition of your brakes. The snow and ice put pressure on the brakes. If you press the brake pedal and hear squealing sounds, consider changing your brake pads.

Oil and Filters

Consider changing the engine oil and oil filter during spring since the engine will put more effort to function during the warmer season. Having fresh engine oil will increase the performance of your truck. A seasonal oil check ensures that it is not affected by moisture.


Summer is the second harsh season after winter. Check the following.

Truck Cooling System

Your truck will overheat due to increased temperatures. Ensure your cooling system works perfectly. Ensure the coolant is at the right level. No leakages should be at the radiator and the hoses. The radiator fans should be in good working condition.


Even though you will have all-season tires, regular tire check-up during summer is essential. Ensure your tires have the right pressure. It is more important to keep your tires at lower pressure. 

The AC

The air-conditioning system is vital during summer. Ensure it works since it will make your cabin conducive during hot temperatures.


If you adequately maintain your truck during summer, you will only have to do a little during fall as it is not very harsh, and your truck will not need any special maintenance.



Switch to snow tires to get the best performance from your truck.


 The heat and dust during summer usually damage wipers. Replace the wiper blades and ensure they are working during winter.


Your heater is yet another thing that should be attended to as part of the seasonal maintenance. The heater stays longer without functioning, which can damage it. Consider checking its condition during winter. To avoid freezing, you must run a maintenance check on your heater.


Your truck is an investment that should be in proper working condition. Maintaining and servicing it is essential for it to run longer. Knowing what to do in various seasons will keep your truck in proper working condition in any season. The checklist in this article will guide you in proper seasonal maintenance for your truck. 

Cost-Effective Ways To Make Your Truck Go Faster

How do you make your truck go faster? Adjustments to your truck to fit your needs and become super faster cost a lot of cash due to the effects of films and TV shows showing the investment people put to increase horsepower and beautifying their vehicles. Therefore, truck owners must seek alternative ways of making their trucks look better and will make your truck go faster on the road. 

Altering your truck to improve its performance does not need to cost you up to the last cent in your pocket. You only need to perform some basic changes that will cost you a few dollars. These are essential changes to consider if you want to make your truck go faster at a lower cost. 

Lower the Suspension

Lowering your truck’s suspension not only makes it look pretty but will also make your truck go faster. Low suspension lets you corner with a lot of ease without pressing the brake pedal more often. The most cost-effective way of lowering your truck is by changing the leaf springs. Doing this, however, will make it difficult to slow down the truck. 

Remove the Big Wheels

Using bigger wheels improves your truck’s stability and shortens the braking distance range. However, the larger diameter implies that the wheel will be heavier, affecting your truck’s speed. It is thus essential to remove the big wheels if you want to improve the truck’s speed.

Reduce the Weight of Your Truck

Reducing the weight of your truck is one of the most cost-effective ways of increasing the speed of your truck. A lighter truck travels way faster than a heavy one. To make your truck lighter, consider stripping off the abundant weight on it. Doing this will make it run way quicker. 

Upgrade Your Brakes

Upgrading brakes is a major consideration when you want to make your truck move faster. You need to redesign the brakes because increasing speed strains the stopping mechanism. Consider installing race cushions, and if your pockets allow, consider installing better rotors. Remember to overhaul your brake hoses as well as the brake fluid. 

Change Air Filter

Air channel plays an important role in each vehicle as it is an ingredient in the combustion system. However, air that gets into the engine carries all sorts of debris. The air filter traps all the dirt and delivers clean air into the combustion chamber. As the air filter functions, it becomes clogged, and this deprives the engine of receiving an adequate amount of air. Regular changing of the air filter lets your engine receive abundant air that increases the performance of your truck.

Change the Spark Plugs

The spark plugs are some of the engine’s components that require regular changing. When your spark plugs are old, your truck will not be able to fire effectively. It will deliver a lot of fumes as well as the power of the engine will reduce. New spark plugs cost a few dollars and take less than 10 minutes to fix. In the end it will also make your truck go faster.


A truck with good speed increases convenience, especially when you are in the delivery business. The above are some cost-effective ways to make your truck go faster. Never skip the regular engine servicing. Doing this gives your engine good health, thereby functioning effectively. 

Truck Tips – How You Could Unknowingly Be Damaging Your Truck

Today we will look at some crucial truck tips to get better with your vehicle. When driving your truck, it could be at risk of getting damaged without you knowing. Poor driving habits can reduce your truck’s life span and general health. Some poor driving habits are road-related, but some occur as a surprise. To maintain the good health of your truck and avoid being a regular visitor at the auto repair shop, keep reading this guide. You will learn some habits that are damaging your truck without your knowledge.

Sudden Braking and Accelerating

When doing urban driving, you do not need to press the throttle hard, as you could end up jamming your brake at the nearest junction. When doing frequent acceleration and braking, you will likely damage your brake pads and give them a shorter life span. Consider driving more consistently. This is one of the least know truck tips that can change a lot.

Pressing the Clutch Pedal When Your Truck is Stationary

When driving a manual transmission truck, pressing the clutch when the truck is stationary is not necessary. Doing this stresses the pressure plate, release arm, and bearing. With time, this can end up damaging your transmission system. Instead of pressing the clutch pedal, shift to neutral gear.

Not Applying the Emergency Brake

Ignoring the emergency brake is common among automatic truck owners who forget to use it after parking their trucks. Doing this not only puts your truck at risk of moving involuntarily, but it will slowly wear down its components. 

When you park your automatic transmission truck without the emergency brake, too much strain will be on the parking pawl, a small metal that locks the transmission and prevents the wheels from turning. When the parking pawl is worn out, the parking gear will not function.

Braking Downhill

Modern trucks do not need you to press the brakes to keep them steady when going downhill. Instead, shift to lower gears when going downhill. Over-depending on brakes when going downhill causes premature wear and tear to your brake pads. 

Ignoring the Warning Lights

Whenever any check light appears on your dashboard, consider taking your truck for a mechanical check-up as soon as possible. However, some truck owners ignore the check light as long as their trucks run smoothly. Checking the cause of the check light earlier will save you from expensive repairs in the future.

Speeding Over Potholes and Speed Bumps

When driving at night or under low visibility, you might hit potholes. But you can always avoid them. Frequently speeding over potholes and speed bumps can interfere with the wheel balancing of your truck and damage the wheels. Apart from the wheels, the suspension and its bushings are also at risk of getting damaged. Slowing down whenever you are approaching potholes and speed bumps is essential.

Ignoring the Service Schedule

Another of the commonly ignored truck tips is failing to schedule servicing and maintenance. Most parts of your truck need a regular check-up to ensure they are in good working condition. Ignoring the scheduled service maintenance can lead to expensive and severe damages.


New trucks are expensive investments. If you are fond of any of the above driving habits, drop them. Knowing such habits is a step towards remedying the problem. Developing good driving habits will let your truck serve you for a long in good working condition. You will also be able to save the extra cash you spend at the auto repair shop. These truck tips are crucial towards getting better results from your vehicle.

Expert Brake Maintenance Tips For Your Truck

Brake maintenance in any vehicle is very important and should not be taken for granted. When driving or even parking your truck, you will need brakes. Brakes are lifesaving parts of your truck. They should therefore work effectively. Worn-out and faulty brakes are some of the common causes of road accidents. However, the role the brakes play exposes them to regular wear and tear. Regular maintenance of brakes enables them to work effectively. Here are some of the expert brake maintenance tips for your truck.

Check the Brake Rotors

When checking your brake pads, consider checking the brake rotors since the two are in regular contact whenever you press the brake pedal. Check the surface of your rotors. If you note grooves on them, it means that the brake pads are eroding the rotors. 

If the damage is mild, grinding the rotors will make them smooth. But if the damage is extensive, consider buying new rotors.

Inspect the Brake Pads

The brake pads take all the heat whenever you press the brake pedal. This should be the first thing in your brake maintenance. They, therefore, wear out at a very high rate. In some trucks, you can see the brake pads from the outside, but in some, the pads are hidden.

It is essential to check the condition of your brake pads every 6,000 miles. To check the brake pads, you have to remove the tires. The pads should have even surface wear and be 5 millimeters thick. If they are worn out, consider fixing new ones. 

Inspect the Brake Lines and Master Cylinder

The brake line and master cylinder are two essential parts of your truck braking system. Their primary role is to transfer the brake fluid from the reservoir to the brakes. When inspecting the lines, check for leaks that usually occur at the joints between the master cylinder and the lines. 

Check the Brake Fluid Levels

One of the fluids you should regularly check is the brake fluid. You must first know where your fluid reservoir is to check your brake fluid. The reservoir has marks that can help you to determine if you have the right quantity of brake fluid. 

Besides checking if you have the right brake fluid levels, knowing if you are using the right brake fluid is another crucial thing when doing brake maintenance. You can know this by checking the owner’s manual, which clearly states the right type of brake for your truck.

Replacing the Brake Fluid

Mostly, we do top up the brake fluid if their level drops. Doing this can infiltrate the brake fluid, damaging the master and the wheel cylinders.

It is thus necessary to replace your brake fluid after every two years or after covering 25,000 miles. Before changing the brake fluid, locate where the bleeder screw is, usually at the back of the brakes. 

Once you open the bleeder screw, the old fluid will drain out. Never open the bleeder screw if you do not have the right tools, as this can cause serious damage. 


Signs of faulty brakes, such as squealing sounds, soft brake pedals, and hard brake pedals, are clear signals that your brakes need maintenance. Truck brakes are complex, and you should consult a professional mechanic to fix them when faulty. When an expert is performing brake maintenance, be attentive to what various parts of the brake look like when worn out.

Crucial Truck Tire Changing Tips To Keep In Mind

What are some of the crucial tire changing tips to note? Your life and that of other road users depend on the nature and the type of tire your truck uses. Pay attention to shredded or punctured tires, as procrastination when replacing them can lead to serious road accidents. 

Fortunately, it is very easy to change a damaged tire, but we need the right tools and experience to do this. These are the dos and don’ts to remember when changing truck tires. 

Things To Do When Doing Tire Changing

Change Tires on an Open Space

Tire changing in an open and large space allows you to move around easily with your tools. If your garage or driveway is large, consider changing your tires there. If you have limited space, consider taking your truck to an auto repair shop.

Placing the Jack

Trucks differ based on the manufacturer and the model. It is thus essential to know the exact position to place your jack. Before changing the tires of a new truck, consider checking the owner’s manual to know the exact place to place the jack. Before using the jack to lift your truck, ensure it is firmly placed, so it does not slip off.

Have Two Pairs of Jack Stands

When lifting your truck, jacks can collapse. Although a single jack is just enough when changing tires, consider using at least two for assured support and appropriate lifting of your truck. 

Apply Brakes

Before working on tires, ensure your handbrake is engaged. Your truck may move in the process of changing tires, which can lead to severe injuries.

Use the Wheel Chocks

Sometimes gravity can make your truck move, or the brakes can fail. Using a wheel chock that will hold your truck stationary is essential. An 8-inch wooden or rubber wheel chock will appropriately hold your truck.

Things To Avoid When Changing Tires

Never Jack Your Truck Before Loosening the Tire Nuts

If you try to loosen the wheel nuts after jacking your truck, the wheel will spin, and the nuts will not become loose. You can also sustain injuries in the process. Consider loosening the wheel nuts before jacking your truck.

Never Tip Your Truck To One Side

Tipping your truck to one side and balancing it using various jacks is dangerous. Doing this is risky and can cost your life. If you do not know how to change tires, take your truck to the nearest auto service shop.

Never Rely on Your Jack

When working under your truck, never trust your jack. Several deaths and injuries have resulted from slipping jacks. Consider using an extra stand after lifting your truck using a jack.

Never Install Dry Nuts

Before installing and tightening your nuts, ensure they are well-greased. Doing this will prevent them from rusting, and they will easily penetrate as you tighten them.


Tire changing is one of the basic truck maintenance that you should know. Although removing and replacing truck tires is simple and basic, the process is extremely risky and can claim life if not well done. Practice the above dos and don’ts when handling the tires of your truck. Besides the tire changing tips, consider inspecting your tires before and after using your truck. 

Crucial Things To See In An Engine Of An Old Truck

Purchasing a used truck is a challenging task because you are dealing with an engine of an old truck. Generally, it takes a lot of work to evaluate the actual value of a used truck. However, the value solely relies on the condition of its engine.

The engine’s performance is the major factor every truck buyer considers before buying a used truck. It is, therefore, essential to check the health of the engine. After reading this guide, you will be able to know some of the crucial things to see in an engine of an old truck. 

What to Check to Know the Condition of the Engine of An Old Truck

It is easy to check the condition of a truck engine. You can do this alone, but for better results, you will need assistance from a professional mechanic. Here is what to check to determine the condition of the engine of an old truck. 

Check for Signs of Weak Truck Engine

It is easy to determine if a truck engine is underperforming or weak. Such engines have signs like the production of unusual noises, loss of power when you press the gas pedal, engine stalls, poor gas mileage, and odd smell. When you witness any of these signs from an old truck is a clear indication that the engine is getting weak.

Service History

When buying a used truck, consider asking for service history. A truck with a clear service history is ideal and will show how to maintain it. Trucks usually have a fixed service interval. Consider checking if the owners heed these fixed intervals.

The service history will let you know if the truck has been serviced at proper intervals. 

Inspect the Odor from the Engine Of An Old Truck

You should worry when the old truck’s engine bay produces strange smells. Such smells indicate that the spark plugs might be faulty or the engine is burning coolant. A strong smell from the engine is an indication of poor truck maintenance. 

Seek the Services of an Expert

It is not easy to check the health of a truck engine and determine its performance. Performing all these can be hectic and stressful alone. Consider seeking the services of a professional mechanic who will help you to determine the health of the engine. 

Inspect the Bottom of the Truck

Another sure way of checking the health of your truck is by inspecting the beneath of the old truck. Doing this will enable you to spot leakages, spots, and strains. If you notice any of these is an indication of a problem with the engine compartment. 

Belts and Hoses

when checking the belts and hoses, rely on the service history as it contains data about their replacement. Apart from the service history, perform a physical inspection on the belts and hoses to determine if there are cracks. Doing this will let you know when to replace these parts.


Old trucks are fragile, and you should be extremely keen when buying one. The engine is the most important point to pay close attention to. This part can be hectic to repair after buying an old truck. When inspecting the engine of an old truck, remember never to forget to practice the tips in this guide. 

Important Accessories To Always Have In Your Truck

What are some important accessories that you must have in your truck? Trucks are more than just a means of transport for most of us. They are like a second home since we spend more time on them. It is, therefore, essential to make your truck more comfortable to stay in as it takes you from one point to another. To achieve this, you much have some essential accessories.

Important Accessories To Always Have In Your Truck

Here are some accessories you should always have in your truck to make your life easier.

Mobile Charger

Smartphones are very important gadgets in our lives. Some phones drain power very fast. When traveling, phones come in handy during emergencies and when you need direction. A smartphone will also entertain you while driving. All these activities will drain your phone’s battery, and you will need to charge it. 

You will need a mobile charger in your truck to charge your phone when its battery drains.

A Portable Tyre Inflator

Another important accessory that you must have in your truck is a portable tire inflator. The tire inflator can rescue you in the middle of nowhere when your tires run out of pressure. It is easy to repair a tubeless tire, and a portable tire inflator will come in handy.

The best portable tire inflator will take 10 to 15 minutes to inflate a flat tire. Having a portable tire inflator will save you from the long queues at the filling stations to check the pressure of your tires. 

Pepper Spray

Safety and security are important when traveling. Pepper spray is another essential truck accessory that you should never miss. Pepper spray is not only important for female drivers. Anyone can use it in an emergency and in self-defense. You can keep it in the door pocket, which you can access when necessary. 

Mobile or GPS Holder

Mobile phones perform various roles, and you can use them as a navigational tool when headed to unfamiliar routes and directions. Although it is not recommended to look at or use the mobile phone while driving, you may need to look at it more often while at the steering wheel. 

To effectively use your mobile phone as a navigational tool, consider having a phone holder that will let you see your phone and the road clearly while driving. There are various types of mobile phone holders. The ones with the suction capability fit well on the windscreen, while the magnetic ones fit well on the dashboard. 

Air Fresheners

The air inside your truck come sometimes become terrible. But when your cabin smells nice, you will feel confident and good in your truck. Consider investing in the best freshener for your truck that will do away with all the bad smells from your truck’s interior. 


Apart from the above accessories, you can as well have a special car cloth that you can use to wipe out dirt from inside your truck. A tow hook and torch, especially when going for long trips. The hook will help you when you need to tow your truck, and also, remember to check on the condition of your spare tire before you start driving. With these accessories in your truck, you should be good to go.

Tips To Defog Your Truck When Driving In The Rain

As a truck driver, you require proper visibility for safe driving and a defog is sometimes necessary. Various factors, such as mist, fog, and condensation, reduce your visibility. While on the road, you will encounter any of the causes of poor visibility. It is, therefore, essential to know how to eradicate factors that hinder visibility.

It is unsafe to drive when it is raining as rain also reduces visibility. Apart from reduced visibility, rains make various driving surfaces slippery. Your truck can slide off the road due to reduced traction. Upon reading this guide, you will be able to understand various tips you can use to eradicate foggy windshields when it is raining. 

How To Defog Windshield When It Is Raining

It feels bad when it is heavily raining while driving your truck then you realize that your windshield can no longer offer you proper visibility. Your windshield will become foggy due to the difference in temperature inside and outside your truck. Here is what to do to defog your windshield when it becomes foggy.

Open Your Windows

When fogging reduces your visibility, it means your cabin is humid. In such a situation, slightly open your windows for the cold air outside to rush in and do away with the humidity inside your truck. The removal of the humid helps in eradicating the fogging on your windshield. 

Increase Heat In Your Cabin

When it rains, you will feel cold. Therefore a warm cabin will make you feel nice. Increasing the temperature of your cabin will not only give you a nice feeling, but the hot air will eradicate the moisture in your truck. The fogging on your windshield will reduce as the hot air collects moisture.

Turn On Your AC

It is weird to use the air conditioner when it is raining. The primary role of the AC is to cool the cabin during the winter season. But when you cannot see clearly due to a foggy windshield, the AC comes in handy. The cool air from the AC will collect moisture inside your truck hence helping defog it. As this happens, the moisture accumulated on your windshield will reduce. 

Avoid Air Recirculation

Air recirculation happens when the air in your cabin cannot escape. Instead, it keeps circulating within the cabin. As air recirculation occurs, moisture fills your windshield, which reduces visibility. You can eradicate air recirculation by using fresh air mode. Doing this will reduce the circulation of mist inside your truck. 

Apply Shaving Cream

A thin layer of shaving cream on your windshield will act as a barrier that prevents moisture from accumulating on your windshield. To do this, consider taking a little shaving cream and applying it all over the windshield using a clean towel from the interior. Use another dry towel to buff the windshield to remove the shaving cream’s residues. After doing this, no residue of the shaving cream should be visible on your windshield. 


During the rainy season, the best way to eradicate foggy windshields is by investing in a heated windscreen. Letting air circulate inside your truck and using the AC effectively are other methods. Consider maintaining your HVAC system to prevent moisture accumulation on your windshield. 

Battery Leaks – What To Do If Your Battery Is Leaking

Have you ever experienced battery leaks? The battery is an essential part of your truck’s electrical system. It does the role of storing power that is necessary when starting your truck. Putting your eye on your battery more often is the best way to ensure it is properly working. Regularly checking your battery will enable you to determine whether it is leaking and take necessary action before it worsens. Upon reading this guide, you will be able to know the common signs of a leaking battery and what to do when your battery is leaking.

Signs of a Leaking Battery

Here are various signs of battery leaks.

  • A smell of a rotten egg from the battery.
  • You will notice corrosion, especially around the terminals of your battery.
  • The casing of your battery looks warped or bloated.
  • When your battery is always wet,
  • The level of acid is always low.

What To Do In Case Of Battery Leaks

Leaking acid harms your truck, your health, and the environment. Your truck can have various leaks, including brown liquid in the truck battery and red or white stuff leakage. All these are indications that the performance of your battery is weak. 

Consider taking immediate action when you notice signs that your battery is leaking. Doing this will either help in rescuing the condition of your battery or even disposing of it before it starts to interfere with other parts of your engine. Fixing a leaking truck battery is not a complex process, but it is essential to let a professional do it for you. Here are what you will need to fix a leaking battery.

  • A plastic pail or basin
  • Baking soda
  • Sealant
  • Sandpaper
  • Epsom salt

After assembling the above tools, this is what to do when your battery leaks.

  1. Consider uncapping the battery post before you start working on it.
  2. Transfer all the electrolytes from the battery into the plastic pail or basin. Be careful when doing this because the electrolyte itself is acidic and can harm you.
  3. Neutralize the sulphuric acid in the plastic pail using baking soda. 
  4. After emptying all the electrolytes from your battery, use sandpaper to scrab the cracked area until it becomes smooth and the cracks are visible.
  5. When you can see the cracks, apply sealant on them and give them two hours to dry before touching them.
  6. Reconditioning the electrolyte is another event in this step. As you do this, you will need three cups of heated distilled water (150F).
  7. Dissolve a cup of Epson salt into the heated distilled water and let the solution heat.
  8. Pour the cool solution into the electrolyte. After doing this, transfer the electrolyte into the battery.
  9. Consider wiping any spillage from the surface of your battery, as this can cause corrosion if left.
  10. Put back the caps on the terminals and ensure they are tightly held. 
  11. Gently shake your battery for at least 5 minutes and let it charge for 36 hours.


Whenever you note that your battery is leaking, consider taking immediate action. You can either fix it with a professional’s help or dispose of it. If your battery has persistent issues, consider calling a professional to check it.

How Often Should You Service A Mini Truck?

Just like other trucks, you need to service a mini truck if you are to get good service from it. Every mini truck manufacturer will advise you to stick to the maintenance schedule if you want it to run smoothly. You may wonder when to service your mini truck, the cost, and what is involved during the procedure. Here you will get the information you need to know about mini truck service.

What & Why Is It Necessary To Service A Mini Truck?

Mini truck servicing involves inspection of the engine oil and filters and replacing them at a fee. Your mechanic will later inspect your mini truck to determine the condition of every part. Upon completion, your mechanic will recommend the parts you need to change and the cost of each part.  

How Often Should You Service A Mini Truck?

If you have just bought a new mini truck that is within the manufacturer’s warranty, consider sticking to the manufacturer’s service schedule. Doing this will keep your warranty valid. Older mini trucks also enjoy benefits from regular annual servicing. When properly maintained, the mini trucks drive smoothly for a very long time.

Proper servicing of your mini truck and keeping a detailed service history preserves its value when you sell it. You can achieve this by performing baseline maintenance, condition-based, and interval-based servicing.

Baseline Maintenance

Baseline maintenance, also known as regular servicing, starts with all the common things you will have to maintain in your mini truck, like changing the engine oil and filters. Baseline maintenance takes half a day and costs between $180 to $350, depending on the quality, type, and amount of oil your mini truck needs.

The price for baseline maintenance also varies depending on the quality, the type of oil, and the filters you opt to use. Generally, most mini trucks should undergo baseline maintenance after every 10,000km. During baseline maintenance, your mechanic will have ample time to inspect your mini truck and give you appropriate advice.

Condition Based Servicing

There are certain parts of your mini truck that you can wait for to show signs of wear and tear to replace them. For example, you will hear a squealing noise when your brake pads are worn out and need replacement. The brake rotors, engine mounting, timing belt, chain, tires, and radiator are some parts that will send you a warning when they need servicing. 

Interval Based Servicing

Consider servicing some mini truck parts pre-emptively because their failure is sudden and will not give any signs or symptoms. Failure of such components can lead to accidents or damage to your mini truck. 

The brake fluid, spark plugs, spark plug coils, battery, and transmission fluid are some parts that will never show any sign of wearing out, but the worst will happen when worn out. Consider checking and changing these parts as per the manufacturer’s instructions. 


Your mini truck needs regular servicing to be reliable and give you a long service lifespan. Most mini truck manufacturers recommend that you service a mini truck after covering a specific mileage or when it starts showing some signs. During servicing, your mechanic will perform a thorough inspection to identify the parts that need servicing. 

Starting A Truck After A Long Time

Have you ever tried starting a truck after a long time and realized that it doesn’t start well? Trucks are fascinating vehicles that everyone aspires to have. Some truck owners have more than one truck or a truck, and other cars may be SUVs, sedans, or sports cars. Owning up to one vehicle can make you not regularly use your truck. You may have traveled and left your truck parked for a long time. Consider the following steps to start your truck safely when you need to use it. 

Starting A Truck After A Long Time

Here are some considerations when you are starting a truck that has been sitting idle for a long time.

Check the Level of the Engine Oil

Before you ignite your truck after sitting for a long time, look underneath for spills and leaks. After doing this, check the level of the engine oil using a dipstick and top it up when necessary. You can start the engine if your truck has the correct engine oil.

Check the Brake, Clutch, and the Transmission Fluid

The brake, clutch, and transmission fluids are essential for the smooth running of your truck. If your truck has been in the garage long before starting the engine, consider checking the level of these fluids. There is a chance of these fluids reducing if there is a leakage within the system. Ensure you have the right level of brake fluid. Call a professional to check the level of the transmission and clutch fluid. 

Check the Coolant Level

Before you start a track after a long time, consider checking the level of the coolant and ensuring it matches the minimum mark in the reservoir. Low coolant can lead to engine overheating when you start your truck.

Check the Condition of the Belts, Hoses, and the Wires

Your truck has belts connected to various pulleys and hoses that transport the engine’s coolant, air, fuel, and other fluids. The electrical system also has various wires. When your truck has been at the parking for longer, it is essential to check the condition of the belts, hoses, and wires before starting the engine. You can replace any of them if you note damage or cracks.

Never Crank Your Engine If It Does Not Start

Sometimes your engine might fail to start when you ignite it. If this happens after your truck has been parked for a long time, the battery voltage might be low. A battery with low voltage will not provide adequate power for the starter motor to rotate the crank that later fires up the engine. If this happens, the dashboard lights, horns, and wipers will function normally. 

Multiple cranks can completely drain your battery. Consider jump-starting your truck when it does not start on the first ignition attempt.

Check the Condition of the Tires

Your truck has stayed for a long without moving, so it is essential to check if the tires have the right pressure. A visual examination will determine whether your tires are over or under-inflated. If the tires are deflated, never drive, but inflate the tires first. You can keep driving your truck if it has run-flat tires. 


The above tips will help you to start a truck and get your truck running to normal after a long time. If you cannot perform them on your own, seek the services of a professional mechanic. When driving after a long time, consider starting at low speeds before speeding. Observe the traffic rules and avoid unnecessary usage of the horn. 

Truck Collision Repair Myths That Are Common

Apart from damaging your truck, a collision can leave you with trauma that will take time to heal and a hefty repair cost. This guide takes you through some collision repair myths. But stress is the killer package after a collision, and it is mainly fuelled by rumors from various individuals and even close family members. Here are some of the truck collision repair myths that are common.

After Collision, Only Repair Your Truck At The Insurance Approved Repair Shop

When involved in a collision and you want to repair your truck, it is not necessary to use the repair shop recommended by your insurance company. You can seek the services of any of your preferred repair shops. But it is essential to consider the recommendations from your insurance company. Doing this will facilitate the process of settling down the issue.

Consider the fact that not all repair shops accept insurance compensation as such compensations take time to materialize. The compensation process will be seamlessly easy when you work with an insurance-recommended shop.

Your Insurance Company Covers All The Repair Cost

Depending on the nature of the cover for your truck, after a collision, many will comfort you never to worry because your insurance policy will cover all the repair costs, and you will not have to dig into your pockets. Such is a myth since the insurance company will cover the repair cost if it exceeds the deductible amount. Under such circumstances, the amount you choose to be deducted for your cover will play a greater role.

If you choose a higher deductible amount, you are more likely to receive lower insurance rates. The deductible amount proves to be a problem regarding collision repairs. You might cover all the repair costs. 

You Will Get the Best Repair Services Through A Dealer

Using a dealer or going directly to an independent repair shop does not affect the nature of the service you will receive. It is a false belief that most dealers have or know the best repair shops they can contact to repair your truck in case of a collision. 

Several repair shops have similar facilities, equipment, and skilled personnel to repair your truck after a collision. They all have equal access to OEM parts. Therefore, there is no need to choose to repair your truck through a dealer. Many people recommend dealers because several auto manufacturers offer them certifications. You will find that dealer with the certification of offering truck collision repairs. 

You Have To Consider Multiple Estimates

Most insurance companies will compel you to seek truck collision repair estimates from at least three repair shops. However, the law does not oblige you to do so. Instead, consider taking an online search and recommendations instead of stressing yourself to visit the repair shops physically. You can decide to choose the repair shop that offers the services that suit all your needs.


Various myths accompany truck collision repair. Every individual will tell you what they know when repairing your truck. It is essential to research and get advice from experts. Doing this will guide you to doing the right thing after a collision. The above myths will save you from messing up when repairing your truck after a collision. 

6 Easy Ways To Reduce Truck Emissions

Is there a way that one can reduce truck emissions? Personal vehicles and trucks contribute 20% of the emissions in the United States. But, such emissions cause more harm to the environment. Due to the risk of emissions, it is a requirement by the United States government that older trucks have to pass an annual emission test for them to remain roadworthy. 

To pass the annual emission test, you must prepare your truck and ensure its emissions are greatly reduced. However, you can reduce the emissions from your truck in these 6 easy ways.

Checking the Tires

When your tires are under-inflated, your truck will consume more fuel, leading to higher emissions. Under-inflated tires offer more rolling resistance. The engine will have to burn more fuel and air to produce the needed power to maintain the speed of your truck. 

Consider checking the pressure of your tires after every two weeks. Ensuring that your tires have the right pressure lengthens their lifespan. 

Perform Regular truck Service

Regularly servicing your truck helps keep it in mint condition and will burn as much fuel as possible to generate the necessary energy. When your truck is well-serviced, it will be safe for you and other road users. During the routine service, consider checking the brakes, the coolants, the oil, and the filters.  

Never Haul Excess Weight

When hauling excess weight, your engine will work extremely hard to generate the energy to move your truck together with its weight. Hauling more weight increases the rate at which your truck consumes fuel. More consumption leads to more emissions. Reducing the load that your truck hauls not only reduces its emissions but also gives your engine a longer life span. 

Always Drive Smoothly

If your foot spends more time on the fuel pedal, your truck will burn more fuel leading to higher emissions. It is, therefore, essential to driving smoothly and carefully. Doing this will least strain your engine and reduce its emissions.

Use the Right Engine Oil

When changing engine oil, consider using the right quality that your truck manufacturer recommends. The engine oil plays the role of lubricating, cooling, and reducing friction in various moving parts of the engine. The right engine oil ensures that your engine is running smoothly and boosting its performance. An engine with optimal performance has minimal emissions.

Use Fuel Additives

If your truck is old, consider mixing the right fuel additive in your gas tank. Doing this will boost the performance of your truck and also help reduce truck emissions. Apart from boosting the performance, it will also reduce the emission of harmful gases to the surrounding. Apart from the above, fuel additives also prevent the fuel injectors from being clogged. 


Truck emissions are harmful to the environment. Therefore EPA has set the standards that every motor vehicle has to comply with in terms of emission. Apart from the EPA regulations, cleaning and reducing your truck’s emissions will help keep your surroundings safe and clean. Consider putting into practice the above tips. Doing so will ensure that reduce truck emissions and minimal harmful gases to the surrounding. 

Secrets To Ensure Truck Engine Goes a Long Way

A truck engine is the heart, brain, and powerhouse of the vehicle. If it malfunctions, your truck will become useless. A truck is the most significant investment for everyone. You must take care of its engine to give you a high return on investment.

A healthy truck engine in good working condition will not only save you money but also boost the reliability of your truck. Consider taking your truck to a specialist for a checkup whenever your engine starts to malfunction. 

An engine might look like a single big section, but it has various components that work jointly to generate power for your truck. It is thus essential to regularly service your engine to give it a long lifespan. Here are the secrets to practice to give your engine the longest lifespan.

Never Skip Oil Change

The truck engine has various metallic components that rub against each other as the engine is functioning. The rubbing generates friction that can tear and wear engine parts. Apart from tear and wear, friction generates heat. The engine oil plays the role of lubricating all the moving parts within the engine. It also absorbs heat from such parts. Another crucial role of engine oil is cleaning the engine parts. 

As the engine plays its roles, it becomes dark, sticky, and less effective and unable to perform its roles. Such happens after a specific mileage, and it is essential to replace your engine oil after 3-6 months, depending on how often you use your truck. When changing the oil, consider replacing the oil filter too. Doing this increases the lifespan of your engine.

Check the Condition of the Spark Plugs

Ensure your spark plugs are well channeled and clean to prevent dirt and debris from finding their way into the combustion chamber. To achieve this, consider disconnecting your plug’s lead and cleaning the area around the spark plug to eliminate any debris that can get into the combustion chamber when removing the spark plug.

Remove the sparkplugs and inspect whether the electrodes are burnt or have cracks. If it has cracks or the electrodes are burnt, consider replacing them. Such a procedure might be time-consuming, but it will improve your truck engine performance.

Clean Your Engine

Like other parts of your truck, the engine needs to be clean to work perfectly. Depending on where you do regular driving, your engine is prone to catching dirt. It is thus essential to keep it clean.

When cleaning your engine, consider using a degreasing agent to clean the outer part of your engine. You can use a vacuum cleaner to blow out dust and debris from the engine casing. The engine’s design keeps dirt from accessing the inner part, so you will not need to clean it. But, if you hear unfamiliar noise, a strange smell, or even smoke from your engine, never drive your truck. Instead, call a professional to determine the cause.


How powerful your truck depends on the health status of its engine. As a truck owner, the health of your truck engine will depend on how to take care of it. When you take care of your engine, it will serve you for eternity. Consider following the above secrets to give your engine a longer lifespan.  

Does Your Truck Needs Servicing? How To Know When To Do It

With your truck, commuting from home to work or running personal errands can be smooth, but do you know when your truck needs servicing? It is thus essential to take care of it by not assuming the warning signs it will give you.

Upon reading this comprehensive guide, you will understand and be able to know when your truck needs servicing among some common problems your truck will encounter as a sign. When you experience the below signs, never continue driving your truck, but take it to the nearest service shop.

Starting Problems

It is never easy to wake up in the morning and start your daily routine. You will take some time to regain. However, this should be different from your truck. 

If your truck is in good shape, it will start without hesitating. When it fails to start, it has a problem you should not assume. If you try for the second time but it still does not start, your battery or any other part can be faulty. Consider visiting an expert for check-ups and repairs.

Your Truck Starts To Stall

Sometimes, your truck’s engine can stop functioning in the middle of a busy road. This is a good sign that your truck needs servicing. Sometimes if you push the accelerator pedal, your engine might sputter. When you experience stalls, it indicates a serious problem with your truck. Consider taking it to a professional for servicing and check-ups.

The Appearance of the Engine Check Light

The engine check light indicates something is wrong with your truck. If it starts to blink on the dashboard, it indicates serious engine problems, and you should fix your truck before taking it to the road. When the engine check light blinks, you will feel you are driving differently. If you are an experienced mechanic, you can diagnose such an issue alone, but the best option is to take your truck to the professionals for a thorough servicing and check-up.

Exhaust Smoke

Your truck should not produce smoke, but if you start experiencing colored smoke from your exhaust, it indicates a problem. Various engine issues, such as oil leaks and colds, can lead to smoke production in your truck. In case of cold, the smoke is normal since it will disappear as soon as your engine and the exhaust system warm-up. However, if the smoke is colored and has an odor, consider taking your truck for servicing. 


Yet another reason that your truck needs servicing is when you experience leakages. You can easily spot leakages from your truck, especially if you park it for a while. During summer, you will notice a small quantity of water under your truck. Such is not leakage but a result of the AC, so you should never worry.

But if you notice green or black liquid from your truck, it might be coolant, engine oil, or even the transmission fluid leaking. In such a case, consider taking your truck for servicing to determine what is leaking and the cause.


Your engine has various parts, and all these parts work jointly to offer a smooth and reliable ride. For your truck to serve you better, you need to service it. Suppose you forgot the actual date to take your truck for service. The above signs will remind you that the truck needs servicing.

Signs Your Truck Suspension Needs Repair & Maintenance

Driving on roads with potholes or rough roads increases the rate at which your truck suspension system wears out. Shocks usually have a service life of 50,000 miles before they wear out. Whenever your suspension becomes faulty, you will experience a poor-quality ride as well as strange noises. Your truck might become stiff and bouncy when speeding.

It is easy to take the truck suspension system for granted when performing regular truck maintenance and this is due to the long life span of service they offer to depend on the nature of the terrain of your regular driving. Consider servicing your suspension system for comfort, stability, and a safer ride. 

The suspension system wears out with time, and you will notice it based on the quality of ride your truck will offer. Upon reading this guide, you will understand some signs that your suspension system needs repair. 

Nose Dives When Stopping

When your shock absorbers are worn out, you will experience the body of your truck having a forward lurching or its nose diving whenever you firmly apply brakes. Nose diving makes it difficult to stop your truck abruptly and can expose you to accidents.

Uneven Tire Wear

Tires are the best indicators of the condition of your truck suspension system. A bad suspension system will make it hard for your tires to have uniform contact with the road, and as a result, you will notice uneven tire wear. You will realize balding spots, indicating that your suspension system is not holding your truck uniformly and exerts uneven pressure on your tires. 

Oily Shocks

When checking your shocks, sometimes you will note that they are greasy or oily. When you note this, it indicates that your suspension fluid is leaking. If this happens, your suspension will not work effectively. Consider replacing your shocks as soon as they start to become oily. 

Your Truck Pulls When Turning

When your suspension starts to fail, your truck will either pull or drift whenever you make a turn. When this happens, it indicates that your shocks cannot prevent the body of your truck from the centrifugal force. Pulling or drifting exposes you to the risk of rolling over. If you experience this when turning, consider checking the condition of your suspension system.

Rough Rides

The design of the truck suspension system enables it to prevent and absorb the shock from road bumps. Such a function lets you have a quality ride even on rough terrains. When driving over bumps and you start to feel each bump on the road, it indicates that your suspension system is wearing out, and you should consider replacing them. 


The suspension is an essential system for your truck. It protects the body and other parts from damage when driving on rough surfaces. The suspension has various parts that work jointly to offer a quality ride. It becomes faulty with time and will give prior signs before failing. The above are some common signs that will warn you to check and replace your truck’s suspension. 

Increasing the Life Of Your Truck Brakes

You will need your truck brakes to slow down or even stop when there is a need to while driving. In heavy traffic, brakes will assist you in controlling your truck. Therefore, brakes are essential when it comes to safety. The braking system has various parts that work hand in hand to give you full control of the speed of your truck. 

In the driver’s cabin, there is a brake pedal whose primary role is to initiate the braking mechanism when pressed. The brake booster controls the pressing mechanism, whose primary role is to regulate the pressure necessary for the driver to operate the brakes. 

There are various braking components on the wheels, such as the disks, drum, brake shoes, brake pads, and master cylinder. The main focus of this guide is to give you some essential tips for increasing the lifespan of your truck brakes.

Flush Your Brake Fluid When Necessary

The heat from braking usually wears the brake fluid, which releases moisture that can cause rust the braking system. With time, the brake fluids get contaminated with debris, rubber, and metallic contaminants. Therefore, it is essential to flush out your brake fluid. 

The process of flushing out brake fluid requires keenness for the truck brakes to function properly, but a professional mechanic will do it within seconds. Here is what happens during the brake fluid flushing.

  • The draining out of the old hydraulic fluid.
  • Cleaning the braking system to remove debris.
  • Inspection of the braking system for rust.
  • A new brake fluid is fed into the system.

Rust and corrosion damage the braking system, leading to expensive repairs. It is thus essential to flush your brake fluid after covering 30,000 miles or driving for two years, depending on how often you drive your truck. 

Ensure your Truck Brakes Disc, and Drum are Clean

Rust and corrosion cause your truck brakes, discs and rotors to wear out prematurely. Cleaning the discs and rotors can be done during routine service, and this procedure helps eliminate dust and other debris that can corrode your disc and rotors. You can clean your disc and rotors if you have basic brake maintenance skills and the necessary tools. 

Avoid Braking At High Speeds

When driving at high speed, never brake instantly. Trucks usually have brake drums and discs. Inside the drum, there are brake linings whose contact with the drums initiates friction to stop your truck. The discs also have pads that perform a similar role. 

The lining and the pads are made of materials that wear out. Instant braking causes tremendous wear out of such parts and can lead to brake failure. When such happens, you will note that your truck shakes when you brake at 60 mph. To avoid premature wear out of the brake lining and pads, it is essential that you gently apply pressure on your brakes to stop your truck gradually. 


Taking care of and increasing the life span of your truck brakes is a simple task. How you drive your truck will mostly contribute to your brakes’ life span. Be gentle when braking at high speed, ensure you flush out your brake fluid, and regularly clean your brake discs and drums. Practicing what is covered in this guide will improve the lifespan of your brakes. 

How Low Temperatures Can Affect Your Truck Regular Use

Do you know the impact of low temperatures and how it can affect your truck’s regular running? During winter, everything suffers right from animals to various machines that make work easier. The cold temperature strains various parts under your truck’s hood, which can interfere with the driving condition. Whenever you leave your truck at the parking, you should understand the adverse effects the winter weather can cause to it. As soon as you are through with reading this guide, you will understand how low temperature affects your truck’s regular use. 


During winter when there are low temperatures, salt is used to melt snow on the roads and the streets. When driving, your truck comes into contact with the melted snow with salt. The salt sticks to various parts of your truck such as the brakes, wheels, and undercarriage. The accumulation of salt in these parts leads to corrosion.

During winter, it is essential to wash your truck regularly, paying more attention to the parts that come into contact with the salt. Avoid wiping salt, as this can scratch the paint of your truck. 

Poor Traction

Low-temperature results in the reduction of the tire pressure. After driving your truck for a while, it will generate heat that will increase the tire pressure. If you use the all-season tires, they will harden the moment temperatures go below 45 degrees. 

The deflation and inflation of truck tires during winter results in loss of traction. You can prevent this by fixing winter tires that will remain soft and offer a good grip on the road during the cold season. 

The Engine Block Can Crack

During the winter low temperatures, your coolant is likely to freeze. When this happens, the coolant becomes hard, which can crack your engine block. Cracks on the engine block lead to various performance issues. To prevent this from happening, use the right coolant during winter. Never mix the regular, green 2-year anti-freeze with long life-life coolant. Doing this reduces the lifespan of the coolant itself. 

Thickening of Fluids

Your truck depends on various fluids such as motor oil, transmission fluid, suspension fluid, and coolant. The extreme cold during winter leads to the thickening of these fluids. They thus will not move smoothly within their respective hoses, when such happens, your truck can malfunction anytime. 

Before the winter season starts, there are signs that you should be aware of. Whenever you note such signs, consider checking the level of all the fluids within your truck and top them up.

Increase In Fuel Consumption

During the low temperatures of winter, trucks usually struggle to function, due to less road grip your truck will move slowly and consume more fuel. Leaving your truck idle for a longer duration in winter also increases the rate of fuel consumption. 


Winter can be devastating to your truck, it is during this time of the year you might experience emergency breakdowns and other mechanical issues. It is, therefore, necessary to know some of the effects of the cold temperature on your truck and how you can prevent them. All you need to know about winter and the effects it has on your truck has been covered in this guide. 

Truck Repair And Maintenance – Top Reasons Never To Skip Them

How regularly do you do your truck repair and maintenance? This guide will take you through all you need to know about that. Owning a truck is the best thing in your life. It is a privilege since many long to, but they have limited budget. However, you have to take care of your truck for it to give you top service. Being consistent and fulfilling the maintenance recommendations of your truck is the only secret to maintaining it. 

Regularly maintaining your truck is beneficial to you and the truck itself. Changing the filters and oil and regularly checking the levels of the fluids is a game changer when it comes to regular truck maintenance. Here are the top reasons why you should never take for granted truck repair and maintenance. 

Identify The Problem Early

Just like other vehicles, trucks gradually develop mechanical problems. Sometimes you might notice your truck has mechanical issues when it is too late, and you cannot avoid the problem. Which becomes damn expensive to fix at this point.  

Regular truck maintenance will enable you to identify and address such problems earlier and take necessary action before they develop into major issues. 

Improves Your Mileage

Performing regular truck repair and maintenance helps in improving your gas mileage. For example, driving with low tire pressure for a long time can cost you up to 3% fuel mileage. The percentage might not be significant but accumulates into more cash with time. It is thus essential to perform regular tire rotation and ensure your tires have the right pressure.

Regular truck maintenance will also enable you to identify and replace dirty air, oil, and fuel filters, which interferes with fuel economy. 

Keep Your Truck High Value

Several factors such as value comes into consideration when planning to sell or trade-in your truck. Truck evaluation is essential, and it is aimed at determining what your truck is worth. During the evaluation, your truck is checked to see if it has mechanical issues. If found, the value of your truck will go down.

When you perform regular maintenance on your truck, it will have fewer mechanical issues and it will fetch the high resale value.

Saves Money

Regular truck maintenance and check-up will help you keep more cheques in your bank account. In trucks, small problems gradually develop into major issues. An oil leak repair can cost you $100, but if you ignore it, you might use $4000 or more to perform a major repair to your truck. 

Increases Your Safety

Several issues can expose you and your passenger to risk when on the road. Driving on balding tires with tiny visible wires inside the rubber is dangerous. Your tires can easily blow when this happens. Several road accidents result from tire blowouts. 

Many truck owners never pay attention to their tires, and thus they fail to know that their tires are in bad condition. During regular truck maintenance and servicing, the technician will check on the condition of your tires and advice you accordingly. 


Trucks have several advantages and help in running many errands. Like other vehicles, they need regular truck repair and maintenance for them to run smoothly. The above are the top reasons why you should refrain from assuming truck repair and maintenance. Always listen to your truck and take seriously the early warning signs it gives before breaking down.  

Truck Maintenance That Needs An Expert To Handle

The knowledge of basic truck maintenance enables you to save hundreds or thousands of dollars you could spend when a professional does it. Such basic maintenance includes changing the oil and the filters. Some truck repairs are complex for you and require an expert. It is, therefore, essential to know when you need help from an expert. 

Taking care of your truck and ensuring that only the experts handle complicated repairs ensures that minor problems do not emerge and develop into major issues. Here is the truck maintenance that requires only an expert to handle. 

Repairing the Air Conditioning System

The AC in the truck is one of the complex parts to repair. Parts such as the compressors usually wear out, and the Freon can leak as well as breakages of the fun. When such parts develop mechanical issues, Your AC will not function effectively. 

The AC has chemicals, so it is not advisable to repair it alone. When you realize your AC is not functioning properly, consider taking your truck to a specialist with the special tools to restore it. 

Replacing the Windshield

Your truck’s windscreen may seem easy to fix when broken. Replacing it requires a professional to work on because it is a highly specialized job that needs special tools which you may not have. 

Wheel Balancing & Tire Mounting

Changing truck wheels is basic truck maintenance that anyone can handle. But performing wheel balancing or fixing new tires on the rims is a challenge and will require a professional. This procedure requires special tools. You can experience uneven tire wear when you fail to perform tire rotation. 

Transmission System Repairs

The transmission system has various complex parts and plays the crucial role of linking the wheels to the engine. The complexity of this part requires a highly professional to handle it. 

The Electrics

Before handling your truck’s electrical system, you should be sure of your ability. Modern trucks have a complex electrical system with complicated wiring that is computer controlled. Performing diagnosis and finding a repair solution requires a skilled truck electrician to perform the task. 

The Cooling System

When the engine is running, it generates heat. The cooling system ensures that the engine has an optimum operational temperature. When the cooling system wears out, you will notice leakages, and your engine may also heat up. Consider taking your truck to a professional for fixing in such a situation. 

The Suspension

The suspension plays a vital role in protecting the body of your truck and other parts from damage when driving in harsh terrain. The suspension has various parts, such as the shock absorbers, the arms, and the leaf springs. When any part of the suspension becomes faulty, it will be difficult to handle your truck. 


A truck has various parts, some of them are simple and you can easily maintain, while others are complex and require only a professional to handle. The timing belt, bodywork, and engine tune-ups are some areas that need a professional to handle. 

Transmission Failure in Trucks – Knowing Before Its Too Late

How do you know about transmission failure in trucks before it is too late? The primary role of the engine in your truck is to generate power which is essential in the rotation of the wheels. The power from the engine reaches the wheels through the transmission system. The transmission is thus an essential system in your truck. 

Efficient transmission is essential for the performance of your truck. It converts torque into power, which is essential for rotating the wheels of your truck at various gear ratios. The transmission is the most expensive part of your truck because it is having various parts, like the gearbox. 

The cost of repair and the replacement of the transmission is relatively high. It is thus essential to be aware of the signs your transmission will show when it is almost failing. Such knowledge will aid in extending the lifespan of your transmission and avoiding costly repairs. 

Early Signs of A Transmission Failure

The transmission does not fail abruptly. It will have to give you some signs that it is soon failing. Here are the early signs you will experience. 

Weird Noises

Truck noises vary depending on the make and model. Whenever your truck produces a strange noise, consider taking time to know where the noise is coming from. Consider noting the nature of the noise if it is whining, clunking, or humming. 

The transmission has various components, and your truck will produce weird noises if any fail. The common noises related to the transmission are whining, clunking, buzzing, and humming. If your truck uses the manual transmission system, it will produce clunking noises. In contrast, the automatic transmission truck will produce a humming, buzzing, or whining noise when faulty. 


Transmission relies on the transmission fluid to function effectively. The fluid reduces the friction and lubricates the transmission parts, preventing them from overheating. The fluid also aids in engaging the gears.

When your transmission failure occurs, you will see leakages of the transmission fluid from your truck. When this happens, friction within the transmission’s inner parts will lead to heat generation. As a result, your transmission will completely break down. Whenever you note that your transmission fluid is leaking, consider taking your truck for a thorough mechanical check-up. 

The Engine Check Light

The appearance of the engine check light is another early sign that your transmission is failing. The light appears when the sensors pick up irregular information from the transmission. When it appears, consider taking your truck for diagnosis to determine if the transmission is the cause. 

Shaking, Jerking, or Grinding

Primarily, when your transmission starts to develop problems, your truck will be jerky, shake or grind. Gear grinding is dominant in manual transmission trucks. In contrast, automatic transmission trucks will hesitate when you shift the gears. Commonly, you will hear truck owners referring to it as slipping gears. When you ignore this, your truck will tremble or shake whenever you change gears. 


The transmission is an essential and the most expensive part of your truck. It is exposed to the regular stress of transmitting the engine torque to the wheels. It, therefore, wears out. Before wearing out, you will experience the above signs. Never take these signs for granted. 

Common Truck Air Conditioning Problems

Summer season is extremely hot, and staying in the cabin of your truck can be unbearable. It is during this time that you will require the air conditioning system. The A/C provides comfort and prevents heat-related health risks like stroke. 

When you realize your air conditioning system is not working perfectly, it is essential to have it checked. Here are some common air conditioning problems you should be aware of. 

Faulty Compressor

The air conditioning system has various parts, such as the compressor, that circulate the refrigerant throughout the system. Thus, it ensures that cool air flows in your cabin. The compressor sometimes fails due to several reasons. If it stays for a long without functioning, it is likely to malfunction. 

To avoid this, consider running your AC system full blast at least once a week for up to 18 minutes despite the weather.

Broken/Blocked Condenser

When your AC blows hot instead of cold air, there is a high probability that your condenser is faulty. The condenser plays the role of cooling the refrigerant. The debris, as well as gunk, can block the path of the airflow. When this happens, the refrigerant will not cool down properly, and as a result, your AC will blow in hot air. 

It is simple to fix this problem. First, you need to locate and identify the condenser that is on the front grill and check for blockage or if it is broken. 

Damaged Fan

When your condenser is functioning properly, but your AC still blows hot air, there is a high probability that your fan is faulty. It is easy to check if your fan is faulty. First, you need to open the hood of your truck, start the engine and turn on your AC. 

If you note that your fan is not running, its age can contribute to this. As the fan serves you, it starts to crack, which can lead to its failure. Blown fuses are also another reason that can make your fan stop functioning. 

Wiring Problems

The electrical wiring within your truck can become faulty. Too much heat can melt down the copper or loosen its ends. Exposure to elements can also corrode the wires. You can visually inspect your wires to identify a faulty wire and fix it. If there is a better solution than this, consider taking your truck to a professional for a check-up.

Truck Overheating

If your AC stops to give cool air, check if your truck is overheating. Several reasons can lead to truck overheating and make it difficult for the AC to function effectively.

When you note that your truck is overheating, stop driving immediately and call a professional for help. 


The air conditioning system is an essential component of your truck. You might not understand its importance during the cold season. But the summer weather will compel you to turn it on, especially when the temperatures of your cabin are extremely high and you need some cooling. Like other parts of your truck, the AC is prone to failure. The above are some common problems related to the AC of your truck. 

Preventing Radiator Leaks In Your Truck

Do you know how you can prevent radiator leaks in your truck? It is never appealing to see leaking under your truck. It does not matter whether the leakage comes from the radiator, water pump, or the cooling system, but it is a sign of something serious worth not ignoring. Fortunately, there are ways you can use to prevent leaks without spending much or performing repairs. The radiator stop leaks flow inside the hoses without narrowing down their sizes. 

The radiator stop leaks are either liquids, pellets, or powder. They are usually poured into the radiator to flow with the coolant. When flowing, it seals the leakages along the cooling system. They also lubricate your water pump together with the seals. Stop leaks are cost-effective in avoiding the headache of taking your truck for a mechanical check and repairing the damages expensively.

The Best Radiator Stop Leaks

Here are some of the best ways to stop radiator leaks you can buy to service your radiator.

K-Seal Coolant Leak Repair

K-seal coolant leak repair works in seconds in offering a tight seal to your cooling system. Using this product is easy and does not require professional intervention. Just buy it and apply it to your cooling system. You can add it when your engine is hot or cold. This feature of working under any temperature makes it time-saving. When adding it to a hot engine, be cautious of hurting yourself. 

The K-seal repair freely mixes with any anti-freeze in your cooling system. Therefore the brand of your truck is not an issue when buying it. When the need arises, it is easy to flush it from the cooling system.

Bar’s Leaks Liquid Aluminum 

Bar’s leak is famous and the best aluminum stop leak. It is a product of various compounds that work jointly to seal leaks and condition your engine. Bar’s leaks are durable and stop leakage in different parts of the radiator made of multiple materials such as aluminum and plastic.

You do not need to flush out your anti-freeze when adding this stop leak. And it is compatible with all kinds of coolants. The downside of this product is applying it, your engine has to idle for at least 20 minutes to seal all the leaking parts.

Blue Magic Radiator and Block Sealer

Blue magic radiator and block sealer is a liquid glass and copper radiator stop leak that permanently repairs all the leaking parts of your cooling system. If you have a heavy-duty truck whose radiator is leaking, this is the best radiator leaks consideration. It is easy to use. Just pour it directly into your radiator, and it will offer a solution within 5 minutes.

The disadvantage of this product is that it works perfectly in big engines and is never clear dry, making it less attractive.


The radiator is a vital part of the cooling system and acts as a point where heat exchange occurs. The hot coolant gets cooled and travels back to the engine. Radiator leaks are common, and it is essential to avoid them as early as possible. Some DIY solutions, such as using radiator leaks solutions, offer a cost-effective solution. The above are some of the reliable radiator leaks solutions to consider.

Common Power Steering Problems In Trucks & How To Fix Them

Power steering problems are not very common, but they exist. Here we will go through ways of fixing them. Driving a truck is fun only when everything is working perfectly. If you realize an issue with your truck’s handling, taking it for a mechanical check-up as soon as possible is essential. As a truck owner, one area you should always pay attention to is the power steering. It is a mechanism that enables you to handle the steering wheel easily. 

All modern trucks have a power steering system. It comprises a pump, a special fluid, and most definitely hoses. Sometimes the power steering system develops issues such as leakages. This guide discusses some power steering problems and how you can fix them.

Common Power Steering Problems & Their Solution

Here are the common power steering problems worth knowing as a truck owner.

Low Power Steering Fluid

The power steering system has a special fluid that aids in the power transmission to the steering. Sometimes the levels of this fluid go down. If such happens, the power steering pump will make a whining sound. 

To solve this problem, check the level of your power steering fluid. Check the manufacturer’s guide to follow the laid down procedure. If the need arises, consider topping it up yourself or seek the services of a professional mechanic. 

Fluid Leakage

The power steering fluid is the most important part of the power steering system. When you realize that the frequency at which you are topping up the power steering fluid increases, there may be leakages in the system. A common sign of leakage is the presence of fluid under your truck. You will note this when your truck is parked for a while. 

You can fix this by taking your truck for a mechanical check-up to determine the exact cause of the leakage and fix it.

Worn–Out and Loose Belts

When the belts within the power steering system are old and worn out, your truck will produce a screeching sound whenever you turn the wheels. 

When the belts are loose, visit your mechanic for tightening or repositioning. But if they are worn out, you can replace them to restore the perfect working condition of your truck.

Cracks on the Hoses

The hoses play the role of transmission of the power steering fluid. These hoses are made of rubber, and they will develop cracks with time. The power steering fluid will start leaking when the cracks advance and become bigger. 

To prevent this, consider performing a regular inspection to check on the condition of the hoses. If you note any cracks on the hoses, replace them as soon as possible.

Slippage On The Hose Coupling

The hoses and other parts of the powering steering system are joined with the coupling. This coupling may slip with time.

It is easy to see this problem, but it is essential to let a professional mechanic work on it as soon as you note a slippage. 


The power steering system makes it easy to control your truck’s steering wheel. The system has various parts that wear out or experience mechanical problems independently. When such happens, the entire system will not function effectively. It is, therefore, necessary to know the common causes of the power steering systems and the possible solutions, as illustrated in this guide. 

Choosing Paint Sealant For Your Truck

Protecting your truck with a paint sealant will give it an appealing look and stay shiny and clean for a long time after cleaning. It feels good to have a nice-looking truck. When your truck’s paint is exposed, it will start to fade with time, but if you apply paint sealant, your truck will look new every day.

Are you thinking of using a paint sealant for your truck? This guide will give you detailed information starting from what a paint sealant is and how to choose the right one for your truck. 

What is A Truck Paint Sealant?

A truck paint sealant can either be colored or a clear coating that, if you apply to the exterior of your truck, it will repel water and other debris that can make the body of your truck rust. Paint sealant gives the painting of your truck a long lifespan.

A paint sealant’s primary role is to protect your truck’s paint from fading, weathering, or oxidation. It will also protect your truck’s paint from scratches or unnecessary marks. You can apply the paint sealant with your hand or use a machine. After washing your car, adding a paint sealant is the best option.

Choosing Paint Sealant For Your Truck

When choosing the suitable paint sealant for your truck, there are a few things you should put into consideration. Here are some of them.


Before buying the best paint sealant for your truck, ask yourself how much time you are willing to invest when applying it. A cleaner wax is the best option for those who always have a limited time. Traditional waxes and spray coatings are the best for those with reasonable time, as you will need a little preparation to apply them.


When considering using paint sealant, your environment will play a more significant role in the frequency at which you will apply the paint sealant. If you are living in areas that experience harsh weather conditions, you will need to reapply the paint sealant more often to maintain the paint protection for your truck.


The final look you want to achieve after applying the paint sealant will be another deciding factor. Some sealants offer a wet look or high gloss, giving your truck an attractive and shiny finish.

Some truck owners love it when their trucks have a mate look since it is not that attention-grabbing and attractive. But still will protect the paint of your truck. It is necessary to consider the kind of look you want to achieve before choosing the right sealant paint. 


When buying a paint sealant, consider the amount you want to spend. Sealant paints vary depending on the prices. High-quality sealants are relatively expensive, and great chemistry sealants, too, are expensive. Apart from the high quality and great chemistry sealants, other sealants in the market offer great protection at a relatively lower price.


The paintings on your truck can fade or become oxidized. When such happens, your truck will no longer have that attractive look unless you repaint it. Paint sealant protects your truck’s paint from any damage and gives your truck an attractive look. Before choosing a paint sealant, consider the above factors.