When To Rotate Your Kei Truck Tires and Why

Tires are one of the major mechanical components of Kei trucks that need to be changed regularly upon wear. But you have probably heard about vehicle tire rotation or have been recommended to rotate your tires by your mechanic. But what is tire rotation exactly and why is it important? In this guide, we will be looking at when to rotate your kei truck tires and why you should do it.

What Is Tire Rotation?

Tire rotation refers to the process of routinely switching the tires of your vehicle. Tire rotation should be done systematically to follow a certain pattern. You can rotate your tires from the rear to front or from either side of the car or both. By rotating your tires, you can inspect their damage, wear off, and air pressure. The difference in tread depth of your tires will be visible and comparable to you.

When To Rotate Your Kei Truck Tires

Normally, Kei truck manufacturers recommend tire rotation at around the time when you service your truck. This is usually a mileage of 5000 miles. However, you can rotate your tires any time need arises or when your mechanic recommends. This applies on occasions when the tread depth might have a significant difference before the mileage is reached.

Tires wear off depending on the load they handle, how occasionally and the type of road used. In addition, tires are subject to damage such as punctures where repair or replacement follows. On such occasions, you can balance the grip of your truck by rotating your tires without necessarily waiting to reach the recommended mileage.

Why Is Tire Rotation Important?

Tire rotation has robust benefits as a routine standardizing, balancing, and taking care of your tires. First, rotating your tires routinely ensures that they wear off evenly. This is because each tire on your vehicle is subjected to a significant but different pressure, friction, and torque for turning, accelerating, and braking. For Example, the rear tires of a Kei truck are likely to be subjected to more pressure when the truck is loaded than the front tires. This subjects the tires to uneven tear based on their position. Tire rotation ensures that the wear is standardized.

Secondly, the uniformity promoted by tire rotation contributes to traction and handling consistency across the four tires. This in turn improves the cornering capability and braking efficiency of your vehicle making it safer.

Final Thoughts

Tires are always exposed to pressure and friction from traction, braking, and turning. But tires do not always wear off uniformly the pressure and friction are depended on their independent position. Tire rotation involves a routine switch of the position of each tire to standardize their wearing off and the grip of the entire vehicle. The safety of the vehicle is enhanced when tires are rotated because they wear off uniformly. The general recommendation of tire rotation is every 5,000 miles covered since the last rotation. However, you should consult your mechanic in case of a puncture that required major repair or tire replacement.